­

Dynamic Height Adjustment System

APW Dynamic Height Adjustment System is set with automatic probe and anti-collision functions, that is, to follow up and prompt adjustment of cutting head through sensor to ensure a constant value between cutting head and surface of object to be cut. It is suitable for cutting objects with smooth surface transition or uneven wave, so […]

By |November 21st, 2014|Technology|Comments Off on Dynamic Height Adjustment System

Waterjet Abrasive Removal System

Abrasive and water mixture is sucked from water tank into abrasive and water treatment vehicle through pneumatic diaphragm pump, so as to achieve the purpose of separation of abrasive and water. Abrasive reverse blowing pipe is used to ensure that the abrasive and water mixture can smoothly get into sand and water treatment vehicle. APW WARS (Waterjet Abrasive Removal System) can […]

By |November 16th, 2014|Technology|Comments Off on Waterjet Abrasive Removal System

Waterjet Abrasive Removal System Plus Water Recycling

After operation is conducted to sand and water mixture, the purpose to separate sand and water can be achieved through APW WARS Plus (Waterjet Abrasive Removal System Plus Water Recycling). Water after separation can be reused to avoid waste and realize environmental protection, energy saving and cost saving. The main principle of WARS Plus is to […]

By |November 11th, 2014|Technology|Comments Off on Waterjet Abrasive Removal System Plus Water Recycling

Fully Automatic Abrasive Supply System

Adopted by air pressure abrasive supply mode, APW Fully Automatic Abrasive Supply System is to transmit the abrasive from abrasive supply tank to the upper abrasive container, and then put the abrasive into waterjet cutting head under the action of subatmospheric pressure of high pressure water and through abrasive transport pipe, so as to maintain continuous abrasive supply […]

By |November 6th, 2014|Technology|Comments Off on Fully Automatic Abrasive Supply System

Automatic Abrasive Supply System

Adopted by air pressure abrasive supply mode, APW Automatic Abrasive Supply System is to transmit grinding materials from abrasive supply tank to abrasive storage tank above waterjet cutting head, and then put abrasive into the cutting head under the action of subatmospheric pressure of high pressure water and through abrasive transport pipe, so as to maintain […]

By |November 1st, 2014|Technology|Comments Off on Automatic Abrasive Supply System

Grid Bar

APW Grid Bar is mainly composed of transverse grid and vertical grid. It is also the main formation of the operating platform of water tank. It is made and bent by stainless steel. Transverse grid is directly welded to the adjustment bracket, while vertical grid is inserted and connected within the transverse grid. Material pending […]

By |October 26th, 2014|Technology|Comments Off on Grid Bar

Fixed Mount for Grid Adjustment

APW Fixed Mount for Grid Adjustment is welded by stainless steel. It is used to adjust side bracket through transverse grids at both sides and fix by top thread to adjust position on water tank. Vertical grids are fixed by the upper transverse grids. It can be adjusted through multiple fixed mounts parallel connection according […]

By |October 21st, 2014|Technology|Comments Off on Fixed Mount for Grid Adjustment

Water Tank

APW Water Tank is made of stainless steel and is mainly used to hold cutting water, abrasive and mince. Replete water tank can be used to prevent bottom damage from water jet. Water tank is welded as a whole and is fixed to the ground through base anchor.

1 – Stiffened plate  2 – Grid bar  3 – […]

By |October 16th, 2014|Technology|Comments Off on Water Tank

5-Axis Waterjet Cutting System

High pressure water switch can quickly shut off high pressure water to save energy. High pressure water can get into cutting head through high pressure pipe, and then get into high precision cutting head body through gem nozzle. Abrasive can get into high precision cutting head body through abrasive transport pipe. Abrasive-water mixture is sprayed onto the materials […]

By |October 11th, 2014|Technology|Comments Off on 5-Axis Waterjet Cutting System

4-Axis Waterjet Cutting System

High pressure water switch can quickly shut off high pressure water to save energy. High pressure water can get into cutting head through high pressure pipe, and then get into high precision cutting head body through gem nozzle. Abrasive can get into high precision cutting head body through abrasive transport pipe. Abrasive-water mixture is sprayed onto the […]

By |October 6th, 2014|Technology|Comments Off on 4-Axis Waterjet Cutting System